ADTRAN Aastra 480i SIP User Manual page 25

Using NetVanta Unified Communications Server Features
To park a call at the next available park number
1 Put the current call on hold.
If your phone has more than one identity assigned to it, then Transfer the call instead of
putting it on hold.
2 Dial *99.
3 Note the hold position that plays over the telephone.
The hold position is used by the person who answers the parked call. UC server selects the park
number for the caller starting at 1, or the next available higher number.
4 Press DIAL.
The call is removed from the hold position, and put in the system park position.
To park a call at a selected park number
1 Put the current call on hold.
If your phone has more than one identity assigned to it, then Transfer the call instead of
putting it on hold.
2 Dial *99.
3 Enter the number that you want to use as the park number.
The hold position is used by the person who answers the parked call. For example, if you enter 1234,
then the call is parked at 1234, and can be picked up at 1234.
4 Press DIAL.
The call is removed from the hold position, and put in the park position.
To answer a parked call
1 Typically, a company announcement informs you that a call is on hold for you.
2 Dial *98.
The system prompts you for the park hold position.
3 Dial the number of the park hold position.
The system disconnects the current call and presents a new call.
4 Answer the new call to speak to the parked caller.
If nobody answers the parked call, the call rings the extension that originally put the call on
system park.
619500100-1A Copyright © 2009 ADTRAN, Inc.
Parking Calls and Picking up Parked Calls
25