Ending Calls; Redialing; Forwarding Calls - ADTRAN Aastra 480i SIP User Manual

Ip phone

Table of Contents

Using Aastra 480i SIP IP Phone Features

5 Press the Xfer button again to complete the transfer.

The transfer will complete once the receiving party answers the call.

You can optionally drop out of the transfer before the receiving party answers the call (effectively

resulting in a true blind transfer), by selecting the line/call appearance button for the original inbound

call, and pressing the Drop soft key.

To perform a consultative transfer to another extension

1 Make sure that you are connected to the call that you want to transfer.

2 Press the Xfer button.

3 Enter the extension number of the person to which you want to transfer the call.

4 If you decide not to transfer the call, go back to the original call by pressing the line/call appearance

button for the held call.

5 Press the Dial soft key to initiate the consultative transfer.

6 When the receiving party answers the call, press the Xfer button to complete the transfer.

If instead you would like to cancel the transfer and return back to the original caller, drop the current

call by pressing the Drop soft key, then press the line/call appearance button for the held call.

2.8 Ending Calls

To end a call, make sure you are connected to a call, and press the telephone button or the Drop softkey. If

you are connected through the handset, you can also place the handset back on hook to end the call.

Press the Redial button to automatically dial the number that was most recently dialed from your

telephone.

The call forwarding feature on the IP phone allows incoming calls to be forwarded to another destination.

The phone sends the SIP message to SIP proxy, which then forwards the call to the assigned destination.

Call forwarding is disabled by default. You system administrator can enable call forwarding on a phone-

wide basis or on multi-line phones on a per-line basis. If you have configured call forwarding on an

individual line, then the settings for this line are used; otherwise, the phone-wide call forward settings are

used. You can have up to 9 lines configured for call forwarding.

Setting call forwarding

You can configure phone-wide call forwarding.

619500101-1A

Table of Contents