Adjustments - Honda HARMONY H1011R Owner's Manual

MAINTENANCE 8x ADJUSTMENTS
6. Look under the riding mower,
just forward of the
transmission, and locate the
belt holder (U-shaped
\
\
bracket). Remove the two
bolts that hold the bracket to
4
\
the riding mower frame.
Note how the bracket is
installed, as it must be
reattached in the same way.
7. Wearing heavy gloves, pull the blade belt off the lower pulley
on the engine crankshaft.
8. A single cross rod mounts
the front of the mower
deck. This cross rod is
held in place with a single
spring clip; remove the
spring clip.
&e
\ \I 5
9.
10.
74
From the left front side of
the mower deck, locate
the L-shaped handle.
Support the front of the
mower deck and pull the
cross rod straight out.
Remove the support and
allow the mower deck to
rest on the ground.
Locate the height
adjustment link connected
to the rear part of the
mower deck. Remove the
spring clip and washer.
Put on heavy gloves, then
push the mower deck
slightly toward the right side
of the riding mower to
disconnect the mower deck.