After Mowing - Honda HARMONY H1011R Owner's Manual

OPERATING THE MOWER
l
Mower deck height and leveling
l
Correct ground speed for lawn conditions
l
Engine throttle in FAST position
0 Sufficient overlap
l
Mowing deck is clear of grass or other obstructions
Adjustments to Improve Cut Quality
Blade
Verify the blade is leveled per the instructions in the
"Maintenance and Adjustments" chapter.
Make sure the blade is in good condition and has a properly
sharpened edge. See page 83 for details.
Cutting height
Make sure the cutting height adjustment lever is properly
set. See page 41.
Tires
Underinflated tires can cause uneven mowing or allow the
mower deck to cut lower than indicated on the cutting height
adjustment lever. Overinflated tires produce a harsher, less
comfortable ride and can also damage the grass and tires.
See page 68.
After Mowing
Always take a few moments to inspect the riding mower
when you've finished mowing. A few simple steps done now
can greatly prolong the life of your riding mower and make it
easier to use the next time.
Under most conditions, the riding mower accumulates
clippings, mud, dirt and other debris on the mower deck and
other areas. Frequently, such debris contains moisture and
if allowed to remain on the mower frame, mower deck or
other metal parts, rust can form. Regular cleaning not only
helps prevent such rusting, but also makes the riding mower
operate better. Also, it is much easier to clean these parts
when the debris or clippings are fresh rather than stuck on
the riding mower for days or weeks at a time.
43