Cool And Heat Mode; Program Mode - ICM Controls SC 5011 Installation, Operation & Application Manual

Cool and Heat Mode (Auto Changeover)
• In this mode, the thermostat controls the cooling and heating systems,
automatically changing over from one to the other as needed .
• The timing display alternates with the set temperature every 10
seconds in the cool and heat mode .

Program Mode

• In this mode, the program function is on (PROG displays), and the
thermostat will automatically be controlled by the set program schedule .
Program mode can function with heat mode, cool mode, or heat & cool
mode . The program schedule can be overridden by changing the set
temperature (up or down button) . After 2 hours, the program schedule
will automatically be resumed . To manually return to the program
schedule, press the PROG button twice .

PROG
PROG
PROG