Setting The Time And Day Of The Week - ICM Controls SC 5011 Installation, Operation & Application Manual

Setting the Time and Day of the Week

The time and day of the week must be set for your program schedule to operate correctly .
1 . Press the SYS (left) button until you are in the OFF mode .
2 . Press and hold the PROG button (SYS (left) and FAN (right) buttons
pressed simultaneously) in for 6 seconds .
3 . Time displays (hour flashing) .
Press the up or down button to adjust the hour .
4 . Press the FAN (right) button once to select minutes (minutes flashing) .
Press the up or down button to adjust the minutes .
5 . Press the FAN (right) button once to select day of the week (TODAY
flashing) .
Press the up or down button to select current day of the week .
Note: At any time, press the SYS (left) button to return to the previous
screen or press the FAN (right) button to advance to the next screen .
Press the PROG button in for 2 seconds to lock values into memory and return
to the OFF mode or press the FAN (right) button once to enter programming .
0
TODAY MON