Non-programmable single stage heat / cool conventional and heat pump; up to 2 heat / 2 cool conventional and heat pump (12 pages)
Summary of Contents for Braeburn Economy Series
Page 1
® User Manual CONOMY ERIES Programmable Thermostats This manual covers the following thermostat models: 2030 1 Heat / 1 Cool Conventional or Heat Pump 2230 Up to 2 Heat / 1 Cool Conventional or Heat Pump Read all instructions before proceeding. Store this manual for future reference 2030-110-01...
Contents 1 About Your Thermostat 4 Operating Your Thermostat Quick Reference - Thermostat and Display ....4 Setting the System Control Mode ......14 Setting the Fan Control Mode .......15 2 User Settings Temperature Adjustment ........16 Accessing User Settings ........... 6 Program Event Indicators ........17 Table of User Settings ..........7 System Status and Maintenance Indicators ..18...
Page 3
Congratulations! You are in control of one of the easiest-to-use thermostats on the market today. This thermostat has been designed to provide you with years of reliable performance and comfort control. Features • Stylish new design with large display and bright blue backlight •...
Page 5
Thermostat and Display SYSTEM Switch ..... Selects the system you want to control PROG Button......Enters programming mode or hold for 3 seconds to enter SpeedSet mode ® BACK Button* ......Secondary function of the PROG button - Moves to previous setting HOLD Button ......
2 User Settings User Settings allow you set the current time of day as well as customize various thermostat features. To access the User Settings, press and release the MENU button to display the first User Setting. Press the buttons to change the value for the displayed User Setting.
Table of User Settings NOTE: Some user settings may not be available, depending on how the thermostat was configured during installation. No. User Setting Displayed Default Available Description of Setting Settings Available Settings N0 Select to keep message displayed CLR Reset SERVICE FILTER Message Y...
No. User Setting Displayed Default Available Description of Setting Settings Available Settings OFF Service filter timer is disabled SERVICE Service Filter Timer FILTER 30, 60, 90, Select number of days for service filter timer 120, 180, 365 Select the number of days before receiving a reminder to change your system filter (if equipped). When the timer interval has expired, the thermostat will display the message SERVICE FILTER.
3 Setting Your Program Schedule Tips Before Setting Your Program Schedule ROOM • Make sure your current time and day of the week AUTO are set correctly. • Make sure the AM and PM indicators are correct. HEAT ON • Your NITE event cannot exceed 11:50 p.m. •...
Page 10
Energy Saving Programs This thermostat comes pre-programmed with a default energy saving program. The following tables outline the pre-programmed times and temperatures for heating and cooling in each of your 4 daily events. If you wish to use these settings, then no further programming is necessary: Residential 7 Day Programming 5-2 Day Programming Factory Settings...
Setting a 7-Day program – All 7 Days at Once (SpeedSet ® (7-day programming mode only) NOTE: Setting all 7 days at once will copy over any previously programmed individual days. Available Daily Events: MORN, DAY, EVE, NITE 1. Hold the PROG button for 3 seconds until M-SU appears. HEAT 2.
Page 12
Setting a 7-Day program – Individual Days (7-day programming mode only) HEAT Available Daily Events: MORN, DAY, EVE, NITE 1. Press and release the PROG button. NEXT 2. Use SYSTEM switch to select HEAT or COOL. 3. Press to select the day you want to program. Press NEXT. 4.
Setting a 5-2 Day Weekday/Weekend Program (5-2 day programming mode only) HEAT Available Daily Events: MORN, DAY, EVE, NITE M TU W TH F 1. Press and release the PROG button. NEXT 2. Use SYSTEM switch to select HEAT or COOL. 3.
4 Operating Your Thermostat Setting the SYSTEM Control Mode The System Control has 4 modes of operation – COOL, OFF, HEAT, and EMER (2230 only). The mode can be selected by moving the SYSTEM switch to the appropriate mode. COOL Only your cooling system will operate. Heating and cooling systems are off.
Setting the FAN Control Mode The Fan Control has 2 modes of operation – AUTO and ON. The mode can be selected by moving the FAN switch to the appropriate mode. AUTO The system fan will run only when your heating or cooling system is running.
Temperature Adjustment ROOM Temporary Adjustment (OVERRIDE) – Press to adjust AUTO the current set temperature. The set temperature will change back to your programmed temperature a few hours later or HEAT ON at the start of the next scheduled program event. OVERRIDE OVERRIDE will appear in the display during the entire override period.
Program Event Indicators ROOM Program event indicators appear in the display to let you AUTO know what part of your current program is active. MORN, DAY, EVE or NITE HEAT When OVERRIDE appears, your program has been temporarily overridden and will resume in 1-4 hours depending on the ROOM selection for User Setting 7 in section 2.
System Status and Maintenance Indicators Status indicators are messages or symbols that appear in the display to let you know what function your system is currently performing. They are also used to inform you of various service and maintenance functions. HEAT ON The heating system is running.
Page 19
System Status and Maintenance Indicators (continued) ROOM AUTO Setpoint temperature has reached its COOL upper or lower limit maximum. HI TEMP Room temperature has risen above the display range. Cooling will still operate to help lower temperature. ROOM AUTO LO TEMP Room temperature has fallen below the HEAT display range.
Page 20
System Status and Maintenance Indicators (continued) ROOM AUTO If batteries are installed and they become low, the battery symbol appears in the display. HEAT When the batteries become critically low, the battery symbol will flash (see “Changing the Batteries” in section 6). MORN User Manual...
5 Additional Operating Features Adaptive Recovery Mode (ARM If enabled, Adaptive Recovery Mode attempts to achieve your desired heating or cooling temperature at the time you have set in your current program schedule, after a setback period. For example, if you set your heat down to 62°...
6 Thermostat Maintenance Changing the Batteries ROOM Depending on your installation, this thermostat may be equipped with two (2) “AA” type alkaline batteries. AUTO If batteries are installed and they become low, the battery HEAT symbol appears in the display. When the batteries become critically low, the battery symbol will flash.
Page 23
When installed by a professional contractor, this product is backed by a 5 year limited warranty. Limitations apply. For limitations, terms and conditions, you may obtain a full copy of this warranty. YEAR • Visit us online: www.braeburnonline.com/warranty LIMITED • Phone us: 866.268.5599 WARRANTY • Or write us: Braeburn Systems LLC 2215 Cornell Avenue Montgomery, IL 60538...