Honda FR600 Owner's Manual page 23

7.TRANSPORTING.
The engine and exhaust system become hot during operation and
remain hot for a while after stopping. Contact with hot engine
components can cause burns and can ignite some materials.
Avoid touching the engine or exhaust system for at least 15 minutes
after the engine has stopped. Allow the engine to cool before
transporting the tiller.
Before Loading
Turn the fuel valve to the OFF
position. This will prevent the
possibility of carburetor flooding
and will reduce the possibility of
fuel leakage.
FUEL
VALVE
OFF
Loading/Unloading
To reduce the possibility of fuel leakage, keep the tiller level while
transporting, and avoid tilting the tiller excessively when loading and
unloading.
l
If a suitable loading ramp is not available, two people should lift the
tiller on and off the vehicle, while holding the tiller level.
l
Position the tiller so the tines and wheels are on the bed of the
vehicle. Tie the tiller down with rope or straps, and block the wheels.
Keep the tie-down rope or straps away from controls, cables,
governor linkage, carburetor, and the fuel line.
21