No.4/No.5 Mirror Unit (Mirror Base C) Lock - Sharp SF-2014 Service Manual

(2) No.4/no.5 mirror unit (Mirror base C) lock

[SF-2014]
1 Perform locking with the unit at its home position and with the
external fitting installed.
2 Lock the unit with two mirror unit fixing screws. (The hole in the
right cabinet)
[SF-2114/2214]
1 Turn off the power at the 64% position. Perform locking with the
external fitting installed.
2 Open the paper feed tray at the right side of the body, and fix the
unit with two fixing screws. (Two holes in the right cabinet)
Mirror unit fixing screw
Mirror unit fixing screw
5. Optional paper feed unit (SF-CM14),
Installation Manual
For use with compatible SHARP copies.
See SHARP copier Installation Manual to determine suitability.
Included parts
Mounting screw A,
1 pc
[SF-2114/2214 only]
(1) Set the main copier unit on the paper feed unit.
1 Lift the main copier unit by the grips, place it upon the paper feed
unit, and slip the positioning holes (3 locations) on the bottom of
the main copier unit over the 3 positioning pins on the paper feed
unit.
[NOTE] This procedure should always be performed by two peo-
ple.
Grip
Positioning pin
4 – 6
Mounting screw B,
2 pc
Grip
Positioning pin