Developer Setting; Toner Supply - Sharp SF-2014 Service Manual

Gently insert the cassette fully into the copier.

(3) Developer setting

1 Open the front cabinet.
Press the front cabinet open buttons in the right and the left sides
of the copier, and open the front cabinet.
Front cabinet open button
2 Open the toner cartridge.
While pressing the toner cartridge release lever (B), open the
toner cartridge.
Release lever (B)
3 Install the developer cartridge.
Insert the developer cartridge along the developer guide.
Check to insure that the developer cartridge is securely locked.
Guide
Developer cartridge
Toner cartridge
4 Supply developer.
Press and hold the developer cartridge in place and remove the
developer cartridge sheet by pulling forcefully.
(Developer will be supplied.)

(4) Toner supply

1 Remove the toner cartridge.
Slowly turn the toner cartridge clockwise and remove it.
1
2 Shake the toner cartridge.
Shake the removed toner cartridge up and down a few times.
3 Install the toner cartridge.
Install the toner cartridge along the guide in the copier.
4 – 4
Sheet
2