Scraper Replacement; Thermistor/Thermostat Removal - Sharp SF-2014 Service Manual

3-6. Scraper replacement

1 Remove the upper fuser unit.
2 Remove the paper exit paper guide fixing screw (step screw) in
the front frame side, and remove the paper exit paper guide.
3 Remove the scraper hook section from the paper exit paper guide,
and remove the scraper.
Scraper
Note: When attaching the scraper, be careful not to deform it. Also
be careful to check that the scraper hook section is completely
inserted into the paper exit paper guide.
Paper exit paper guide

3-7. Thermistor/thermostat removal

Press this projection to desassemble
* Note for assembly
•
Be sure to bring the thermistor center into contact with the heat
roller.
•
Clean and remove foreign materials from the thermistor surface
with alcohol.
6 – 8