Expansion Cards And Bbu; Installing Expansion Cards - Fujitsu PRIMERGY TX200 S5 Options Manual

8

Expansion cards and BBU

V
CAUTION!
Follow the safety instructions in the
8.1

Installing expansion cards

The system board offers six PCI slots:
– 5 x PCIe slots, all mechanical x8:
– 2x PCIe x8 slots (Gen2), one slot is open on the right side to allow a x16
graphics card to be inserted
– 2x PCIe x4 slots (Gen2)
– 1x PCIe x4 slot (Gen1)
– 1 x PCI slot (32 bit / 33 MHz)
I
Boot controller:
Slot 1 and slot 5 are configured for the boot controller by default. If a boot
controller is to be operated on another slot, this needs to be configured
in the BIOS Setup (Advanced/PCI Configuration/PCI SLOTS Configu-
ration/Option ROM Scan: Enabled, see the BIOS Setup manual). The
"Option ROM Scan" setting specifies whether the adapter BIOS is
started by the system BIOS in the respective PCI slot.
TX200 S5
chapter "Safety
Options Guide
instructions".
65