Fujitsu PRIMERGY TX200 S5 Options Manual page 78

Second serial port
Figure 68: Installing the serial port
Ê Insert the long slot cover with the serial port in slot 7 (1) as described in the
section "Installing expansion cards" on page
Ê Route the cable in the bracket on the right (2) as shown in the photo.
Ê Connect the free end of the cable to the COM2 port on the system board (3).
Ê Reinstall system fan 2 (or 2&4) as described in the
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter
78
"Completion".
Options Guide
Further options
65.
chapter "Completion".
TX200 S5