Table of Contents
Advertisement
Installing expansion cards
Ê Open the server and remove system fan 2 (or 2&4) as described in the
chapter
"Preparation".
Figure 51: Removing the slot cover
Ê Open the slot locking bar (1).
Ê Remove the slot locking bar (2).
Ê Remove the PCI slot cover (3).
V
CAUTION!
Keep the slot cover for further use. If the expansion card is removed
again and not replaced with a new one, the slot cover has to be
reinstalled to comply with applicable EMC regulations and satisfy
cooling requirements and fire protection measures.
Ê Unpack the new expansion card, and make the desired settings. You should
read the accompanying documentation supplied with the expansion card
beforehand.
66
Options Guide
Expansion cards and BBU
TX200 S5
Advertisement
Table of Contents
