Fujitsu PRIMERGY TX200 S5 Options Manual page 68

Installing expansion cards
V
CAUTION!
If a long expansion card was installed, the plastic part of system fan 2 (or
2&4), which belongs to the related slot, must be broken off before system
fan 2 (or 2&4) is installed.
Figure 53: Example: System fan 2 - Breaking off plastic part
Ê Reinstall system fan 2 (or 2&4) as described in the
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter
68
"Completion".
Options Guide
Expansion cards and BBU
chapter "Completion".
TX200 S5