Fujitsu PRIMERGY TX200 S5 Options Manual page 36

Installing a second processor
V
CAUTION!
Only processors of the same type may be used on the system board.
That means the number of the internal processor cores as well as the
primary clock and the FSB frequency have to be the same. For dual
operation, use a suitable multiprocessor operating system.
Ê Open the server and remove system fan 2 (or 2&4) as described in the
chapter "Preparation".
Figure 16: Opening the heat sink retaining clips
Ê Press the heat sink retaining clips downward and inward to release them (1).
Ê Swing the heat sink retaining clips up as far as they will go (2).
36 Options Guide
Processors
TX200 S5