Table of Contents
Advertisement
-
5. Remove
the front link adjust pins and install the new front link adjust
pins included
with
the MK4618
kit. Adjust
the length
of the front
deck link to 300-302
mm (1 1.8-
11.9
in.), then tighten
the lock
nut securely.
Connect
a front deck link to the right side of the cutter
deck and to the right bracket on the tractor.
Secure with 14 mm plain
washers
and linch pins.
NOTE:
To ease
installation
of the front
deck
link on the tractor
bracket,
raise the front of the deck slightly
with your hand.
Align the hole in the right bracket of the front link protector
with the
pin at the center
of the right front deck link, and secure with the 12
mm lock pin (gold). Attach
the left bracket of the front link protector
to the left front deck link and secure in the same way.
Connect
the left front deck link to the left side of the tractor,
then to
the cutter
deck. Secure
in place with two 14 mm plain washers
and
two
linch pins.
(P
0
14 mm PLAIN WASHER
I
12
LINCH
PIN
mm PLAIN WASHER
12 mm LOCK PIN
LINCH
PIN
FRONT
DECK LINKS
FRONT
LINK PROTECTOR
21
Hide quick links:
Advertisement
Table of Contents
