Honda H5518 Operator's Manual page 21

n
Cutter deck installation
-
1. Connect the spark plug caps to the spark plugs and insert the ignition
key in the ignition switch. Check that the hydraulic lift lever is in
NEUTRAL. Start the engine and move the hydraulic cylinder selector
lever (optional part) to the "FRONT" position. Raise the lift arm fully
with the hydraulic lift lever.
HYDRAULIC LIFT LEVER
HYDRAtiLlC CYLINDER
SELECTOR LEVER
(OPTIONAL PART)
Turn the descent speed adjust knob fully clockwise.
Stop the engine and remove the key from the engine switch and
disconnect the spark plug caps.
- 2. Turn the steering wheel to the extreme left. Position the cutter deck
under the tractor from the right side; return the steering wheel to
straight-ahead position.
19