Installing Mower; Loose Parts - Honda H5518 Operator's Manual

4. INSTALLING MOWER
l
The rotary mower should be installed by an authorized Honda dealer
unless the owner has proper tools and feels he is mechanically
qualified.
l
To prevent accidental start-up, remove the ignition switch key, and
disconnect the spark plug caps before installing the mower.
Install with the tractor on level ground.
Lock the parking brake, set the transmission lever in "N" (Neutral) and the
front and rear P.T.O. levers in the "OFF" positions.
1. Loose parts
Before assembling the rotary mower, check for any missing or damaged
parts.
0 Indicates the loose parts furnished with H5518 Tractor.
0 Indicates the loose parts furnished with MM46Kl Rotary mower.
* Indicates the loose parts furnished with MK4618 Tensioner kit.
OLIFT LINK SHAFT
QCUTTER DECK LIFT ROD
@ OPLAIN WASHER
OLIFT LINK
OLEFT CUTTER DECK LIFT
ARM
OLOCK N'J' OSPJT PIN OLlFT ARM
PIN
ORIGHT LIFT ARM
OLIFARM- ~
OPLAIN WASHER
] FRONT TENSIONER BRACKET ]
*FRONT P.T.O. ASSEMBLY
(Front Tensioner bracket)
UARD
NSIONER SPRING
l
2-TENSIONER BRACKET
FLANGE BOLTS 8 x 16 mm
(Shouldered)
&
e 0
8
.e
Q
e
t
e
QG-FLANGE BOLTS 8 x 25 mm
OFRONT HITCH PIVOT A
P
ODRIVE PULLEY 81 -SPECIAL FLANGE BOLT
8 x 20 mm (Shouldered)