Honda H5518 Operator's Manual page 42

Mowing unsquare areas
If your mowing area is not square or four-sided, divide the area into
several blocks so you can mow in a neat mowing pattern.
Overlapping on straightaways.
Be sure that each mowing lane overlaps sufficiently. The recommended
overlap width is between 4-6 in., or approximately the width of one of
the mower's front tires.
1st
Overlapping in curves and turns
4-6"
When cutting in curves and turns, shift to a slower speed and be sure to
overlap the previous cut by 50%, or approximately half the width of the
mower.
40