Table of Contents
Advertisement
FastTrak TX4310 User Manual
Logical Drive Rebuild
Rebuild refers to the process of repairing a logical drive by reconstruction the
data on one of its physical drives.This feature only applies to logical drives with
redundancy, RAID 1, RAID 5 and RAID 10.
You can set up a Rebuild to:
•
Begin immediately (on demand)
•
Schedule a Rebuild for a time when there is less demand on the RAID
system
•
Begin automatically when a logical drive goes critical or degraded (see
"Create a Spare Drive" on page 91)
On Demand
To rebuild a logical drive:
1.
Click on the Logical Drive View
2.
Click on the Logical Drive
3.
Click on the Rebuild tab in Management View.
4.
Select physical drive to use in the rebuild.
Available drives have a black frame. Selected drives have a red frame.
5.
Click the Start Now button.
icon in Tree View.
icon of the logical drive you want to rebuild.
78
Advertisement
Table of Contents
Need help?
Do you have a question about the FastTrak TX4310 and is the answer not in the manual?