Table of Contents
Advertisement
1.
Boot your system. If this is the first time you have booted with the FastTrak
card and drives installed, the Promise onboard BIOS will display the
following screen (below).
2.
Press the Ctrl-F keys to display the FastBuild Utility Main Menu (below).
3.
Press 2 on the Main Menu screen to display the Define LD Menu (below).
4.
Press the arrow keys to highlight an logical drive number you want to define
and press Enter to select it.
11
Chapter 2: Installation
Advertisement
Table of Contents
Need help?
Do you have a question about the FastTrak TX4310 and is the answer not in the manual?