Table of Contents
Advertisement
12. Select an Initialization policy from the dropdown menu.
•
Fast Initialization – Erases the Master Boot Record (MBR) of the
physical drives being added to the logical drive.
•
Full Initialization – Erases all sectors of the physical drives being
added to the logical drive.
•
None – No initialization. This choice is not recommended.
13. Click the Finish button.
If there are physical drives available, the Select RAID Level screen appears
again, where you can create an additional logical drive.
Click on the Logical Drive
logical drive.
Icon to see all of the information about your new
71
Chapter 5: WebPAM
Advertisement
Table of Contents
Need help?
Do you have a question about the FastTrak TX4310 and is the answer not in the manual?