Specifications - Promise Technology FastTrak TX4310 User Manual

Features
Complies with Serial ATA II:
Extensions to Serial ATA 1.0a
Specification
Compliant with PCI Bus
Master standard. PCI Bus
Master support
Tested compatibility to coexist
with motherboards that have
integrated IDE controllers
Compatible with all major
SATA generation 1 and SATA
generation 2, phase 1 and
phase 2 disk drives
Features LBA support
Supports BIOS Boot
Specification
Compatible with Promise
SuperSwap enclosures

Specifications

• Low-profile printed circuit board
• PCI Slot 33 MHz or 66 MHz
• Controller card dimensions (H x W): 2.25 x 4.75 inches (57 x 121 mm)
• Operating temperatures: 32
• Operating humidity: 5% to 95% non-condensing
Compatibility
Provides enclosure and drive monitoring
compatibility.
Provides 32-bit I/O and, Bus Master, and Serial
ATA performance for optimal system
performance.
Improves system performance and minimizes
system conflicts for new and existing
installations.
Promise performs verification testing with major
drive manufacturers and development partners.
Supports drives greater than 137 GB capacity.
All disk arrays attached to the FastTrak card
appear in the BBS-compliant motherboards
BIOS boot list.
Provides enclosure management including fan,
temperature and voltages.
° ° °
to 122 F (0 C to 50
5
Chapter 1: Introduction
Benefits
°
C)