System Resources; Logical Drive Problems - Promise Technology FastTrak TX4310 User Manual

System Resources

The information in the System Resources section might be helpful for
troubleshooting purposes:
• The system IRQ used by the FastTrak card
• ATA IO Address
• XOR and HDMA IO Address
• Sequence Control IO Address
• Flash and SRAM IO Address

Logical Drive Problems

While disk drives are highly reliable, on occasion a disk drive can fail. Fault-
tolerant (RAID 1, 5 and 10) logical drives go Critical when a disk drive fails. Non-
fault-tolerant logical drives (RAID 0) and JBOD go Offline when a disk drive fails.
When you boot your system, the FastTrak BIOS screen informs you if there is a
critical or offline logical drive. Allow your PC to finish booting and use WebPAM to
identify the failed drive and to rebuild your logical drive.
See "Logical Drive Critical / Offline" on page 85.
41
Chapter 4: FastBuild™ Utility