Error Codes - NCI 7620 Family User Manual

Raw Counts
NCI SMA, AS350D or
PS6L Communications

Error Codes

M<CR>
Scale Response
<LF>xxxxxxxMM<CR>
<LF>hhh <CR><ETX>
All other commands
Scale Response
<LF>?<CR><ETX>
Contact your Weigh-Tronix service provider or
the Weigh-Tronix customer service department
Protocol
for protocol.
Any system errors detected by the scale will be
displayed as the letter E followed by a two-digit
error code. Press the UNITS key to continue
operation. If a calibration error occurs, the only
way to clear it is by recalibrating the scale.
The error codes are broken down into two
hexadecimal numbers, with each bit defining a
single error condition. The error codes are
defined as follows:
Model 7600 Family PWC User's Manual
Returns normalized
raw counts and
status
Unrecognized
command
33