Initial Setup - NCI 7620 Family User Manual

Initial Setup

Unpacking the Scale
Installing the Scale
1. Check container for any obvious evidence of
damage.
2. Remove contents of the shipping container.
3. Inspect the scale for shipping damage.
Immediately report any damage to the
shipper.
1. Mount the scale on a stable, level surface
free from air currents and vibration. Be sure
the scale platter does not touch any adjacent
surfaces.
2. To install the scale surface flush with a
countertop, use these dimensions to guide
construction:
7620
7680
3. Loosen the plastic collars (7620) or jam nut
(7680) on the leveling feet. Level the scale by
using the level bubble under the scale platter
as a guide. Be sure all four feet are in firm
contact with the counter, then tighten all
collars (nuts).
Model 7600 Family PWC User's Manual
Platform
Dimensions
14" W
12.5" D
4.2" Min Ht.
18" W
18" D
4.6" Min Ht.
Minimum Cutout
Dimensions
14.75" W
13.25" D
18.75" W
18.75" D
9