NCI 7620 Family User Manual page 13

Menu Mode
Gravity Mode
Model 7600 Family PWC User's Manual
There are four modes available to you with
Switch 1 in the Menu mode or OPEN position.
They are as follows:
1. DIAG Mode – To test areas of the scale's
function
2. CONFIG Mode – To configure your scale for
your application
3. CAL Mode – To calibrate the scale
4. Re-CAL Mode – To change specific calibra-
tion parameters without having to re-calibrate
the scale.
With Switch 2 in the Gravity mode or OPEN
position, you may increase the "Local" gravity
value by pressing the ZERO key or decrease the
value by pressing the UNITS key.
The structure for these menus is shown in Figure
2. Specific information about each mode and
step-by-step instructions for accessing them
follow.
13