Figure 2
7600 Menu Structure
14
Notes:
(1) The 're-calibration values displayed will be the same
(2) Will flash "can't" if originally calibrated for a non-
(3) Will flash can't if originally calibrated for a non-
(4) To change the 'Local' gravity setting, press (and hold)
Model 7600 Family PWC User's Manual
as those of the original 'calibration units of measure.
switching kg capacity/resolution.
switching lb capacity/resolution.
the ZERO key to increase the value, or press (and
hold) the TEST key to decrease the value. When
done, set Switch 2 back to the CLOSED position.