NCI 7620 Family User Manual page 11

Model 7620 or 7680 Resident Display
Operational Controls
ZERO Key – The ZERO key will zero the scale if
weight is stable, functions as the NO or SCROLL
key in the Menu mode, and as the INCREASE
key in the Gravity mode.
UNITS Key – The UNITS key can be used to
change the scale unit of measure or to recall the
scale configuration information during the initial
power-up test sequence. This key also functions
as YES or ACCEPT in the Menu mode, and as
the DECREASE key in the Gravity mode.
Remote Display
All NCI 7600 bench scales can have an optional
remote display (shown above with no keyboard
function). If a remote display with keyboard is
used, then Switch 3 (shown in Figure 1) deter-
mines which display keyboard is functional.
Switch 3 Settings
Closed= internal display keys operational
Open = external display keys operational
The remote display must be connected to the
RJ45 port ("DISPLAY") on power up to operate
properly.
11
Model 7600 Family PWC User's Manual