NCI 7620 Family User Manual page 27

7. Press the UNITS key. The current capacity/
resolution setting is displayed.
8. Press the ZERO key until desired capacity/
resolution is displayed.
9. Press the UNITS key to select a new
capacity/resolution.
10. Press the ZERO key...
UNITS is displayed. To change the
UNITS key status or the current unit of
measure, press the UNITS key, the
current choice is displayed.
11. Press the ZERO key to toggle between UNIT
ON and UNIT OFF.
12. Press the UNITS key to select the UNITS key
status and to display unit selections. To
change units, press the ZERO key to toggle
between the choices.
13. When the choice you want is displayed,
press the UNITS key.
14. Press the ZERO key...
RNG-INT is displayed. To change
RANGE operation, press the UNITS key.
The current setting is displayed.
15. Press the ZERO key to toggle between RNG
ON and RNG OFF or INT ON.
Model 7600 Family PWC User's Manual
27