HP 339674-001 User Manual page 30

30 HP KVM Server Console Switch User Guide
5. Repeat steps 1 through 3 for any other servers to be added to this system.
6. Connect the local port KVM cable to the cascaded HP KVM Server Console
7. Power on the cascaded HP KVM Server Console Switch.
8. Power on the monitor.
9. Power up the server.
10. Update the cascaded HP KVM Server Console Switch firmware ("Updating
11. Update all Interface Adapter firmware ("Updating the Firmware" on page
12. Power off the cascaded HP KVM Server Console Switch.
13. Disconnect the local KVM cables from the cascaded HP KVM Server
14. Connect the local port KVM cable to the main HP KVM Server Console
15. Connect a UTP CAT5 cable to the server connection port ("Components" on
16. Connect the other end of that same UTP CAT5 cable to the RJ-45 interface
17. Repeat steps 15 and 16 for any other console switches to be added to this
18. Power on the console switches.
19. Power on the monitor.
20. Update the main HP KVM Server Console Switch firmware ("Updating the
21. Update all Interface Adapter firmware ("Updating the Firmware" on page
The following figure shows an HP KVM Server Console Switch cascaded to
another HP KVM Server Console Switch. The top console switch is the main
console switch, while the bottom console switch is the cascaded console switch.
Switch.
the Firmware" on page 75).
75).
Console Switch.
Switch.
page 17) on the main HP KVM Server Console Switch.
port ("Components" on page 17) on the cascaded HP KVM Server Console
Switch.
system.
Firmware" on page 75).
75).