System Controls; Arming Mode (Manual Auto) - Honda Security System Operating Instructions Manual

Arming Mode
(MANUAL AUTO)
1
2
3
4
© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
This section explains how to switch the arming mode from MANUAL to AUTO.
NOTE:
Factory preset is MANUAL.
Disarm the security system.
Steps from 2 to 4 must be completed within 3 seconds.
Insert the ignition key, and remove the iginition key from the iginition switch.
(All the way out.)
4713010M
Insert the ignition key, and remove the ignition key from the ignition switch.
(All the way out)
4713010M
Insert the ignition key.
You will observe the following.
• The system "beep" once.

System Controls

The switching procedure is
MANUAL MODE Completed
AUTO MODE Not completed
The result
Beep once
No beep
5