Download Print this page
   

Advertisement

INSTALLATION
INSTRUCTIONS
PARTS LIST
Security System:
P/N 08E51-S84-100
2 Remote controls
Control unit
LED
Push nut
2-Pin connector
Disarm switch
Fuse label
3-Pin connector
3 Nuts, 12 mm
Washer
Owner's Manual
Screw with washer,
4 x 30 mm
© 1999 American Honda Motor Co., Inc - All Rights Reserved.
Accessory
SECURITY SYSTEM
Attachment Kit:
P/N 08E55-S30-101
Security system
wire harness
2 Cushion tapes
Control unit bracket
Fuse label
2 Collars
2 Nuts
10 Wire ties
Self-tapping screw
4-Pin relay
Seal
Y0540-F
AII 21018 (9909)
Application
2000 PRELUDE
Publications No.
AII 21018
Issue Date
SEP 1999
1 of 9
08E55-S30-1010-91

Advertisement

   Related Manuals for HONDA 08E51-S84-100

   Summary of Contents for HONDA 08E51-S84-100

  • Page 1: Installation Instructions

    3-Pin connector Self-tapping screw 3 Nuts, 12 mm Washer 4-Pin relay Owner’s Manual Screw with washer, Seal 4 x 30 mm 1 of 9 Y0540-F © 1999 American Honda Motor Co., Inc - All Rights Reserved. AII 21018 (9909) 08E55-S30-1010-91...

  • Page 2

    2 of 9 AII 21018 (9909) © 1999 American Honda Motor Co., Inc - All Rights Reserved.

  • Page 3

    First drill a pilot hole with a 10 mm drill bit, then finish with a 12 mm drill bit. Push. • Remove all burrs. SCREW 3 of 9 © 1999 American Honda Motor Co., Inc - All Rights Reserved. AII 21018 (9909)

  • Page 4

    COLUMN COVER LOWER COVER DISARM SWITCH 14. While wearing eye protection, drill a 5.5 mm hole through the center-punched mark. Remove all burrs. 4 of 9 AII 21018 (9909) © 1999 American Honda Motor Co., Inc - All Rights Reserved.

  • Page 5

    18. Secure the antenna of the control unit to the steering CONTROL UNIT beam with one cushion tape in the area shown. CUSHION ANTENNA TAPE CONTROL UNIT CONTROL BRACKET UNIT 5 of 9 © 1999 American Honda Motor Co., Inc - All Rights Reserved. AII 21018 (9909)

  • Page 6

    16-pin (blue) connector the security system harness in between. VEHICLE HARNESS FUSE BOX 16-PIN CONNECTOR 16-PIN CONNECTOR SECURITY SYSTEM (Blue) WIRE HARNESS 6 of 9 AII 21018 (9909) © 1999 American Honda Motor Co., Inc - All Rights Reserved.

  • Page 7

    4-pin, 5-pin, and 6-pin connectors of the security system harness in between. 5-PIN CONNECTORS 4-PIN 4-PIN 5-PIN CONNECTORS 6-PIN CONNECTORS 6-PIN SECURITY SYSTEM WIRE HARNESS 7 of 9 © 1999 American Honda Motor Co., Inc - All Rights Reserved. AII 21018 (9909)

  • Page 8

    29. Plug the 2-pin connector of the LED harness into the 2-pin connector of the security system wire harness. 16-PIN CONNECTOR FUSE CASES CUSHION TAPE 8 of 9 AII 21018 (9909) © 1999 American Honda Motor Co., Inc - All Rights Reserved.

  • Page 9

    OWNER'S MANUAL LABEL HARNESS FUSE LABEL 41. Check operation of the security system according to the Owner’s Manual supplied. Open the fuse case cover. 9 of 9 © 1999 American Honda Motor Co., Inc - All Rights Reserved. AII 21018 (9909)

This manual also for:

08e55-s30-101

Comments to this Manuals

Symbols: 0
Latest comments: