Download Print this page
Honda 2007 PILOT SECURITY SECTION Installation Instructions Manual

Honda 2007 PILOT SECURITY SECTION Installation Instructions Manual

Security system
Hide thumbs Also See for 2007 PILOT SECURITY SECTION:

Advertisement

INSTALLATION
INSTRUCTIONS
PARTS LIST
Security System Kit (sold separately)
P/N 08E51-EP4-101
Security system control unit
LED
Push nut
2-pin connector (for LED)
Microphone
Window decal
Accessory user's
Information Manual
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
Accessory
SECURITY SYSTEM
Attachment Kit (sold separately)
P/N 08E55-S9V-100A
Security system harness
Control unit bracket
8 Wire ties
Wire tie with connector holder
Holder bracket
2 EPT sealers
Cushion tape
Flange bolt
Small wire tie
All 33080-33238 (0607)
Application
2007 PILOT
08E55-S9V-1A00-91
Publications No.
All 33080-33238
Issue Date
JULY 2006
1 of 7

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2007 PILOT SECURITY SECTION and is the answer not in the manual?

Questions and answers

Alix Taylor
January 20, 2025

my key fob does not work, and the alarm goes off when I start the engine

1 comments:
Mr. Anderson
May 14, 2025

If the key fob does not work and the alarm goes off when you start the engine, check if you are using a properly coded key. An improperly coded key will cause the immobilizer system indicator to blink rapidly and prevent the engine from starting. Use the correct coded key to stop the alarm and start the vehicle. If the issue continues, have a qualified technician inspect the system.

This answer is automatically generated

Summary of Contents for Honda 2007 PILOT SECURITY SECTION

  • Page 1: Installation Instructions

    2-pin connector (for LED) Holder bracket 2 EPT sealers Microphone Cushion tape Window decal Flange bolt Accessory user's Small wire tie Information Manual 1 of 7 © 2006 American Honda Motor Co., Inc. - All Rights Reserved. All 33080-33238 (0607) 08E55-S9V-1A00-91...
  • Page 2: Tools And Supplies Required

    SECURITY UNIT DRIVER’S DASHBOARD LOWER COVER SELF-TAPPING CLIPS (3) SCREW 3D08170T SECURITY SYSTEM HARNESS 3D08011T MICROPHONE Remove the switch cover (two retaining tabs). 2 of 7 All 33080-33238 (0607) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
  • Page 3 TABS (7) Push LOWER STEERING COLUMN 3D08190T COVER SELF- SECURITY SYSTEM TAPPING SCREW CONTROL UNIT WASHER- CONNECTOR AREA 4N17020Y SCREW (Do not push here.) 3 of 7 © 2006 American Honda Motor Co., Inc. - All Rights Reserved. All 33080-33238 (0607)
  • Page 4 HARNESS WIRE TIES WITH CLIP 3D08073T SECURITY SYSTEM SECURITY CONTROL SYSTEM 4N17040Y UNIT HARNESS 12. Reinstall the TPMS unit removed in step 6. 4 of 7 All 33080-33238 (0607) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
  • Page 5 21. Route the security system harness 2-pin COLUMN COVER UPPER STEERING COLUMN COVER HARNESS PUSH NUT WIRE TIE (Note the installation direction.) 3D08111T 5 of 7 © 2006 American Honda Motor Co., Inc. - All Rights Reserved. All 33080-33238 (0607)
  • Page 6 MICROPHONE 24. Reinstall the lower steering column cover. Installing the Microphone MICROPHONE JACK SWITCH COVER 3D08101T 6 of 7 All 33080-33238 (0607) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
  • Page 7 AUTO function. panel, and plug it to the security system control unit. 31. Secure the security system harness to the vehicle 7 of 7 © 2006 American Honda Motor Co., Inc. - All Rights Reserved. All 33080-33238 (0607)