First Installation And Tv Settings; Channel Selection; Infobar; Teletext - Maxview MXL002 User Manual

FIRST INSTALLATION AND TV SETTINGS

When you have completed the required connections to your satellite receiver, plug in the mains lead and switch
on (Please refer to "Connections" (page 12) to verify their correctness).
Turn on the TV and satellite receiver and press the "MENU" button on the satellite receiver remote control
handset. If you are using a scart connection to the TV, no TV settings are required. Whenever you turn on your
TV and receiver, the TV will automatically display the receiver screen. (Some TVs may not have automatic scart
switching. In this case, you need to enter the AV mode using the TV remote control handset).

CHANNEL SELECTION

You may use several methods for channel selection.
> You may select a channel by pressing " "/" " buttons while any program is being displayed. The number
and name of the channel that you have selected will be displayed under the screen.
> You may select a channel, using the number buttons. The number of the channel you have selected will be
displayed under the screen. You may apply this method in three ways:
1. Press the channel number as four digits. For example, to select the channel 1875, press 1, 8, 7, 5, and to select
the channel 27, press 0, 0, 2, 7.
2. Press the channel number only and then wait a few seconds. For example, to select channel 168, press 1, 6
and 8 and wait. To select channel 56, press 5 and 6, and then wait.
3. For fast access to the channels, while entering the channel number, keep pressing the last number. For
example, to access channel 3, press and hold button 3. To access channel 14, press 1 and then press and hold
button 4.
> You may call the "Channel List" by pressing
the "OK" button, if the "Channel List" menu is
not displayed. (Please see "Channel List").

INFOBAR

INFOBAR is displayed at the lower side of the screen with each channel change. This bar will
show channel number, channel name, signal level and some information relating to the
channel being displayed. Various symbols will show if the channel, is on the favourite list, has
alternative languages for that channel, is a radio channel, if the channel is scrambled and if teletext is available.

TELETEXT

If your TV does not have Teletext function you may use your receiver's Teletext function.
> The teletext data is available on some channels only.
> Select the teletext channel you would like to view and press the "TXT" button.
> You may use the " "/" " buttons to alter the page number.
> For direct access to requested programs you may use the number buttons.
> Pressing the "TXT" button while Teletext is active makes the Teletext page transparent.
> To exit the Teletext press "MENU" button.
14
TIMERS
Timers are used to turn the unit on/off at
programmed times. Your receiver contains 8 timers.
For timer settings:
> Enter the "Main Menu" and then go to the "Timers"
sub menu.
> Select the timer that you want to change by using
" "/" " buttons, and then press the "OK" button.
The "Timer Details" menu is displayed.
> In the "Timer Details" menu select the channel that
you want to set using the " "/" " buttons. Enter the
date of the program in "Date". Enter the "Start time"
and "End time" by using the number buttons on the
handset. (If the start time of the program is later than
the end time it is assumed to be the next day.)
> "Mode" can be selected as "Once", "Daily" or
"Weekly" by using " "/" " buttons.
• If you choose "Once": It turns on the receiver only
on the date that you entered in "Date". "Weekday"
option becomes unavailable.
• If you choose "Daily", "Weekday" and "Date"
become unavailable. The program selected will turn
on/off at that time, every day.
• If you choose "Weekly", "Date" becomes
unavailable but you can change the day in "Weekday".
If you entered a day in the "Date", every week it will
turn on/off on the day that you have chosen.
> "Active" should be set to "Yes" to activate the timer.
> Save the changes by pressing the "BLUE" button.
> After completing the changes, press "MENU" or
"EXIT" button to exit from the "Timers" menu.
Notes:
If the power fails for any reason, all timer settings will
be deleted and all timers turned off.
Before adjusting the timers, time and date should be
entered in "Time & Date" sub-menu.
The settings should not conflict with one another.
31