Table of Contents
Advertisement
Selecting an installation location:
Positioning the Antenna Unit
> Check for obstructions such as roof lights and vents.
> Check for electrical cables beneath screw fixing points.
> Check Antenna Unit cables will reach Control Box
(Maxview can supply extended cables).
> Do not allow the dish to overhang the edge of the vehicle
> Clearance around antenna system when in use is shown with reference
A
E
F
Key dimensions (cm) and weights Seeker/Seeker Skew
65cm: System weight 10kg
A:
17
D:
65/66
B:
100
E:
96
C:
67
F:
ø43*
Positioning Control Box:
Site the Control Box in a convenient location where:
> Front and rear connections are accessible.
> Cables can be routed and concealed neatly.
> There is an electrical supply of 12V dc permanent and ignition.
> There is adequate ventilation.
> The Control Box is not encased with metal (if using wireless mode).
> Material construction and thickness is suitable for fixings.
Positioning Control Panel:
The Control Panel is designed to be easily visible in the living area as it displays a clock and thermometer when
in sleep mode.
> Do not place near wet hazard areas such as near sinks or bathroom.
> Do not place near heat sources or in direct sunlight.
> Avoid placing Control Panel next to walk ways where it could easily be knocked.
Page 6
Visit: www.seekerwireless.co.uk for potential software updates
B
85cm: System weight 11kg
G:
52/53
A:
17
H:
15
B:
117
I:
110
C:
85
C
I
G
H
D:
87/88
G:
64/65
E:
113
H:
14
F:
ø43*
I:
125
I
D
Advertisement
Table of Contents
