Maxview MXL002 User Manual page 20

> SKIP: Press the "GREEN" button to enter
"Operation" menu in the "Channel List". Select
by using " "/" " buttons, "Skip" operation is
activated. If there is a channel that you want to skip
while changing channels in the "Channel List",
highlight that channel by using " "/" " buttons and
press the "OK" button. The channel name will be pre-
fixed by the " " sign. This channel will be skipped
from now on when using the remote control handset.
However, you may still access that channel by entering
its number using the remote control.
> HIDE: Press the "GREEN" button to enter
"Operation" menu in the "Channel List". Select by
using " "/" " buttons. If you select "Hide
Channels" option, "Hide" operation is activated. Each
channel you select via the "OK" button will be
hidden. If you select the "Show hidden chs." option
you can see the hidden channels again. If you press
the "OK" button while on a hidden channel, that
channel becomes visible. If you select "Don't show
hiddens" in the menu below the selected channels
become invisible again.
> Press "MENU" or "EXIT" button to exit the
"Channel List" menu. If you've made a change to the
"Channel List", a message, "Do you want to save
changes" will appear on the screen. Press the "OK"
button to store the changes or press "MENU" or
"EXIT" button to exit without storing.
20
> PID Setting: When you press the "GREEN" button,
"PID" menu comes up. The values in this menu are set
automatically while searching, so it is not necessary to
change these values.
> AUDIO Setting: When you press the "YELLOW"
button, "Audio" menu comes up.
> "Mode" is "Stereo" unless any changes are made.
"Mode" can also be set to "Left", "Right" or "Mono"
using " "/" " buttons.
> The volume of some programs may be higher or
lower than the others. This can cause the volume to
increase or decrease abruptly. In order to compensate
for such volume differences, the "Volume offset" op-
tion in the "Audio" menu can be used.
> When you increase the volume offset, the volume
of the program will increase, and when you decrease
the volume offset (with – values), the volume of the
program will decrease accordingly. When in "Volume
Offset", adjust the volume difference between +10
and -10 by using " "/" " buttons.
> Access to Audio Tracks: Some programs can be
broadcast in several languages. Press the "OK" button
when you have highlighted "Audio Tracks". Select the
language you want.
> Press "MENU" or "EXIT" button to exit from the
"Audio" sub-menu. A message, "Do you want to
store?" will be displayed if you have made any
changes. Press the "OK" button to store. Press
"MENU" or "EXIT" button to exit without storing the
changes.
25