Table of Contents
Advertisement
6. Maintenance
aintenance
To change colours or different materials it's best to first withdraw the leftover
To change colours or different materials it's best to f
extruder head. Initialise the printer and choose "
e the printer and choose "3D print->Maintain" and click
the system automatically begin
ture, the printer will beep, and you can gently
the printer will beep, and you can gently withdraw the material.
Place a new spool of material on the
material on the spool holder, and pull it through the filament tube
material is about 10cm out of the
Select the "maintain" menu form the "3D Print" menu
Select the "maintain" menu form the "3D Print" menu. Then press the "Extrude" button in the
"maintain" dialogue. After the printer nozzle has warmed up to 260°C, the printer will beep. Push
"maintain" dialogue. After the printer nozzle has warmed up to 260°C, the printer will beep. Push
"maintain" dialogue. After the printer nozzle has warmed up to 260°C, the printer will beep. Push
the filament into the hole at the top of the extruder head, with a little pressure, and the extruder
the filament into the hole at the top of the extruder head, with a little pressure, and the extruder
the filament into the hole at the top of the extruder head, with a little pressure, and the extruder
will automatically extrude material. The plastic thread is squeezed out of the nozzle
will automatically extrude material.
thin, bright and smooth. Then in the maintenance window click "New Spool" and enter the mat
Then in the maintenance window click "New Spool" and enter the mate-
Then in the maintenance window click "New Spool" and enter the mat
rial weight of the spool so the printer can keep track of material usage.
rial weight of the spool so the printer can keep track of material usage.
If the nozzle is blocked,
If the nozzle is blocked, remove the nozzle and clean it.
The extruder and platform are hot. Use gloves when working in this area of
The extruder and platform are hot. Use gloves when working in this area of
The extruder and platform are hot. Use gloves when working in this area of
printer.
printer.
This is only recommended to carry out if you find that your
This is only recommended to carry out if you find that your
models are not vertical.
The Vertical calibration procedure allows you to ensure that
n procedure allows you to ensure that
the printer platform is perfectly horizontal and that the prin
the printer platform is perfectly horizontal and that the print-
er prints consistently in the X, Y and Z direction.
er prints consistently in the X, Y and Z direction.
Open the "Calibrate" box form the "3D Print" menu.
Open the "Calibrate" box form the "3D Print" menu.
Click Reset and then print the
print the supplied Calibration model on
your printer. The calibration file is
printer. The calibration file is located in "C:\Program
Files\UP\Example".
UP Mini 3D Printer User Manual
3D Printer User Manual
begins to heat the nozzle. When the nozzle reaches the
f the tube, then insert it into the hole at the top of the extruder head
lick "Withdraw" and
reaches the correct tempera-
and pull it through the filament tube, until the
at the top of the extruder head.
out of the nozzle should be
material from the
" button in the
43
Advertisement
Table of Contents
Need help?
Do you have a question about the UP MINI and is the answer not in the manual?