3D Printing Systems UP MINI User Manual page 14

10. Plug the USB cable into the left hand side of the prin Plug the USB cable into the left hand side of the print-
er.
11. Plug in the power adapter into the left hand side of the Plug in the power adapter into the left hand side of the
printer.
12. Switch on at the wall socket Switch on at the wall socket and switch on at the back
of the printer.
13. Visit www.3dprintingsystems.com/support www.3dprintingsystems.com/support
and install the 3D Print Software. and install the 3D Print Soft
14. Installing the drivers (Windows) Installing the drivers (Windows)
15. Open the software, then click "3D Print" and then " Open the software, then click "3D Print" and then "Ini-
tialise". The printer should align each of its 3 axis e". The printer should align each of its 3 axis.
X axis – the table forward and backwards, the table forward and backwards,
Z axis – table up & down, table up & down,
Y axis – head moves left and right and then beeps. head moves left and right and then beeps.
16. Load the filament into the extruder head, click "3D Load the filament into the extruder head, click "3D
Print" / "Maintenance" / "Extrude" Print" / "Maintenance" / "Extrude"
17. Before you can print, you need to set the height b can print, you need to set the height be-
tween the nozzle and the tween the nozzle and the platform.
18. Let the printer know you have added a new spool of Let the printer know you have added a new spool of
material. Click "3D Print" / "Maintenance" / "New material. Click "3D Print" / "Maintenance" / "New
Spool"
19. Download the test "Bunny
first print"
20. Run the software and then click Run the software and then click "Open". Locate where
you downloaded the "
UP Mini 3D Printer User Manual 3D Printer User Manual
to download
Bunny.STL" file located under "My
"bunny.stl" file and open it.
Chapter 3.1.2 Installing the 3.1.2 Installing the
software
Chapter 3.1.3 Installing drivers 3.1.3 Installing drivers
(Windows)
Chapter 3.1 hapter 3.1.5 Initialising the
Printer
Chapter 3.1.6
Loading the
filament into
the Extruder
Chapter 3.1.7 1.7 Setting the Plat-
form Height
Chapter 6.1. Other Mainte- Chapter 6
nance Options – New Spool nance Options
http://3dprintingsystems.com/s http://3dprintingsystems.com/s
upport/
Chapter 3.2.2 Loading a 3D Chapter 3.2.2 Loading a 3D
model
Head
15