Table of Contents
Advertisement
4. Install the latest UP software.
oftware.
5. Unplug the USB cable, then plug again. Windows will find a new device. Manually select
5. Unplug the USB cable, then plug again. Windows will find a new device. Manually select
5. Unplug the USB cable, then plug again. Windows will find a new device. Manually select
driver folder (Default is C:\Program files
6. There should now be a new driver section in the device manager as shown below:
6. There should now be a new driver section in the device manager as shown below:
6. There should now be a new driver section in the device manager as shown below:
Here is a video on the driver installation
Here is a video on the driver installation
1. Install the latest UP software.
UP software.
2. Find the "3DPrint@FreeMC"
nd the "3DPrint@FreeMC" it might also be referred as "Free Motion" or "Unknown"
"Device Manager" dialog box (it should be located in the USB section).
"Device Manager" dialog box
3. Select "Update Driver." in the right click menu.
UP Mini 3D Printer User Manual
3D Printer User Manual
Program files\UP\Driver or C:\Program files(X86)\UP
http://www.youtube.com/watch?v=hGYTCRYkJr4
it might also be referred as "Free Motion" or "Unknown" in the
in the right click menu.
4. Troubleshooting
4. Troubleshooting
UP\Driver);
?v=hGYTCRYkJr4
55
Advertisement
Table of Contents
Need help?
Do you have a question about the UP MINI and is the answer not in the manual?