Xga line transmitter / da; cat5 line driver / da; xga / audio line transmitter; xga / audio line receiver; xga / audio / data line transmitter; xga / audio / data line receiver (33 pages)
Figure 3: Connecting the TP-953/TP-954 Figure 4: CAT 5 Pinout Tables Table 1: Features and Functions of the TP-953 Table 2: Features and Functions of the TP-954 Table 3: Equalization Level Setup Table 4: CAT 5 Pinout ...
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
Resolution up to WUXGA (reduced blanking) • HDCP compliance 1 Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non- Kramer CAT 5, CAT 6 and CAT 7a cables may not reach these ranges...
Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products; the Kramer BC-DGKat524 (CAT 5 24 AWG), the Kramer BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer BC-DGKat7a23 (CAT 7a 23 AWG cable). These specially built cables significantly outperform regular CAT 5/CAT 6/CAT 7a cables.
Your TP-953 DVI/Audio Line Transmitter Figure 1 Table 1 define the TP-953 unit. Figure 1: TP-953 DVI/Audio Line Transmitter Table 1: Features and Functions of the TP-953 Feature Function DVI IN Connector Connects to the DVI source (digital signals only) ANALOG 3.5mm Mini Connector...
Table 2: Features and Functions of the TP-954 Feature Function IN A, IN B RJ-45 Connectors Connects to the OUT A, OUT B connectors on the TP-953 Connects to the DVI acceptor (digital signals only) DVI OUT ANALOG 3.5mm Mini Connector...
The two CAT 5 cables to OUT A and OUT B on RJ-45 connectors 2. On the TP-954 connect: The OUT A CAT 5 cable from the TP-953 to the IN A RJ-45 connector on the TP-954 The OUT B CAT 5 cable from the TP-953 to the IN B RJ-45...
Connecting a DVI/Audio Transmitter/Receiver System Figure 3: Connecting the TP-953/TP-954 Adjusting the EQ. Level To adjust the equalization to compensate for various cable lengths: 1. Press the EQ. SELECT button for about 3 seconds to enter the setup mode. The IN or OUT LEDs flash according to their current setup.
Connecting a DVI/Audio Transmitter/Receiver System Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors Table 4 Figure 4 define the STP CAT 5 pinout using a straight pin to pin cable with RJ-45 connectors. Note: The cable Ground shielding must be connected/soldered to the connector shield: Table 4: CAT 5 Pinout Figure 4: CAT 5 Pinout...
1 Specifications are subject to change without notice 2 On a DVI-I connector. Note that only the digital signal (DVI-D) is available on the DVI connector 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
Page 13
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 14
For the latest information on our products and a list of Kramer distributors visit www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.