Tools And Supplies Required - Honda Automobile Accessories Installation Instructions Manual

Wire tie with clip
9 Long wire ties
Cushion tape
Red connector clip
Relay, 4-pin
Relay, 5-pin
Fuse label
Cover
2 of 12

TOOLS AND SUPPLIES REQUIRED

Small flat-tip screwdriver
#2 Phillips screwdriver
Eye protection (face shield, safety goggles, etc.)
Center punch
Drill
5.5 mm, 10 mm, and 12 mm Drill bits
Tape measure
File
Felt-tip pen
Pliers
17 mm Combination wrench
10 mm Socket
Ratchet
Scissors
Utility knife
Illustration of the Security System Installed on the
Vehicle
4-PIN
RELAY
RIGHT
FUSE BOX
SECURITY
SYSTEM
WIRE HARNESS
CONTROL UNIT
All 21624 (0008)
5-PIN
RELAY
LED
DISARM SWITCH
© 2000 American Honda Motor Co., Inc - All Rights Reserved.
LEFT
FUSE BOX