Honda Automobile Accessories Installation Instructions Manual page 9

28. Remove the upper bolt that fastens the engine
hood opener, and attach the ground terminal of the
security system wire harness with the ground bolt
from the kit.
No. 5
CONNECTOR
OF FUSE BOX
ENGINE HOOD
OPENER
GROUND TERMINAL OF
SECURITY SYSTEM
WIRE HARNESS
29. Plug the 1-pin connector (white) of the security
system wire harness into the No. 5 connector of
the fuse box.
30. Under the dashboard at the fuse box, locate the
4-pin connector blue-taped to the vehicle harness
(22-pin connector), and remove the blue tape to
free the connector. Connect the 4-pin connector
you just freed to the 4-pin connector (C) of the
security system harness.
LEFT
FUSE
BOX
© 2000 American Honda Motor Co., Inc - All Rights Reserved.
1-PIN CONNECTOR OF
SECURITY SYSTEM WIRE
HARNESS (WHITE)
GROUND BOLT
(from kit)
ENGINE HOOD
OPENER MOUNT BOLT
(Discard.)
VEHICLE
22-PIN CONNECTOR
BLUE TAPE
(Remove.)
4-PIN
CONNECTOR OF
SECURITY
SYSTEM WIRE
HARNESS
(WHITE)
SECURITY SYSTEM
WIRE HARNESS
All 21624 (0008)
31. Unplug the 20-pin connector from the left fuse box,
and plug the two 20-pin connectors (white) of the
security system wire harness in between.
LEFT
FUSE
BOX
SECURITY SYSTEM
WIRE HARNESS
32. Locate the 2-pin connector blue-taped to the
vehicle harness 18-pin connector, and remove the
blue tape to free the connector. Connect the 2-pin
connector you just freed to the 2-pin connector of
the security system wire harness.
VEHICLE
18-PIN CONNECTOR
LEFT
FUSE
BOX
2-PIN CONNECTOR OF
SECURITY SYSTEM
WIRE HARNESS
VEHICLE
20-PIN
CONNECTOR
20-PIN CONNECTORS
OF SECURITY SYSTEM
WIRE HARNESS
BLUE TAPE
(Remove.)
VEHICLE
2-PIN CONNECTOR
SECURITY SYSTEM
WIRE HARNESS
9 of 12