Honda Automobile Accessories Installation Instructions Manual page 5

9. Remove the right fuse box cover (three retaining
clips and two tabs).
RIGHT FUSE
BOX
10. Remove the passenger's dashboard lower cover
(three screws and seven retaining clips).
GLOVE BOX
SCREW
PASSENGER'S
DASHBOARD
LOWER COVER
© 2000 American Honda Motor Co., Inc - All Rights Reserved.
TAB
CLIP
RIGHT FUSE
BOX COVER
TAB
SCREW
SCREW
CLIP
All 21624 (0008)
11. Open the glove box, and remove the two screw
caps and seven self-tapping screws. Unplug the
connector, and remove the glove box by pulling it
toward you.
CONNECTOR
SELF-TAPPING
SCREW
CAPS
12. Lower the steering wheel tilt lever. Remove the
upper and lower steering column covers (three
screws, six tabs, and one harness clip). Gently
push on the six retaining tabs, and separate the
two steering column covers.
TABS
(Push.)
STEERING WHEEL
TILT LEVER
Push
TAB
GLOVE BOX
UPPER
STEERING
COLUMN COVER
TABS
(Push.)
LOWER
STEERING
COLUMN
COVER
SCREWS
5 of 12