View Log - Bosch Fire System User Manual

VIEW LOG ?

Description
Use this function to review events in your system at your command
center. Reviewing past events may help you identify problems.
Viewing events does not require any additional equipment since the
information is displayed at your command center. Events are
stored in the panel's memory in order of occurrence and tagged
with the date and time.
See the Log Event Definitions section on page 21 for more
information regarding logged events.
Using View Log:
1. Press the [ESC] key to enter the Menu, then press [NEXT]
repeatedly until you reach the VIEW LOG ? prompt.
Press [ENT].
2. ENTER START DATE displays.
To view the entire log from the newest event, press [ENT].
The date and time of the event displays. Press [NEXT] to
view the description of the event, or press [PREV] to view
the description of the prior event. Press [PREV] again to
view the date and time of the previous event.
Continue to press [PREV] to view event descriptions and
the date and time of each event.
Note: When using the [NEXT] key to view the log, the date
and time of the event are displayed first, followed by the
description of the event. An event description may take up
two displays.
3. Continue pressing [NEXT] to view the rest of the log. When
you reach the end of the log, END OF LOG displays.
4. Press [ESC] to return to idle text.
16