Bosch Fire System User Manual page 20

VIEW POINT STATUS ?
Description
Use this function to identify the number or location of each point
in an area, and to show the current condition of any point you
select. This function is useful as an aid in servicing the system.
1. Press the [ESC] key to enter the Menu. Press [NEXT]
until the VIEW PT STATUS ? function is displayed.
2. Press [ENT]. The display shows AREA X ## (where X
= the area number and ## = the number of points to
view).
3. Press [ENT]. The display shows PT ## XXXXX (where
XXXXX = the type of point). Press [ENT] again to see the
current condition of the point. The display shows one of
the following:
• PT###_SHORT_HW: a hard wire (HW) point is
shorted.
• PT###_OPEN_HW: a HW point is open.
• PT###_NORML_HW: a HW point is normal.
• PT###_MISNG_HW: a HW point is missing.
4. Continue to press [ENT] to see the type and condition of
each point in the area.
5. Press [ESC] to return to idle text.