Bosch Fire System User Manual page 25

FIRE TRBLE - Trouble condition at point specified.
FIRE START - Fire Walk Test started.
LOG FULL - Panel log is full. New event overwrites oldest event.
LOG THRES - Panel log reached programmed threshold (Log %
Full).
MISS FIRE - Fire point specified missing.
MISS TRBLE - Point in area specified missing. Area disarmed.
PARAM CHG - Panel programming changed.
PHONE FAIL - Panel detected phone line specified as faulted.
PHONERESTOR - Phone line specified detected as restored from
faulted condition.
PROG - Event modifier for BYPASS, RELAY SET, and RELY RESET
events. Indicates function initiated from local programmer.
PROG BAD - Attempt to access panel with a local programmer failed.
PROG OK - Panel successfully programmed by a local programmer.
PT TESTED - This point walk tested.
PWR RESET - Power was reset at specified time.
RAM FAIL - RAM programming session terminated abnormally or
RAM using incorrect passcode and/or lock code.
RAM OK - RAM programming session terminated normally.
REBOOT - Panel reset.
RELAY SET - Relay set (activated). An event modifier showing how
the relay was set follows this event in the log.
RELY RESET - Relay reset (deactivated). An event modifier showing
how the relay was reset follows this event in the log.
REMO - Event modifier for BYPASS, RELAY SET, and RELY RESET
events. Indicates function initiated from Remote Account Manager
(RAM).
24