System Trouble Displays - Bosch Fire System User Manual

System Trouble Displays

If you see any of the following system trouble displays, contact
your servicing company to determine whether repairs are needed:
CALL FOR SERVICE
Call your servicing company. Your security system may have failed.
SERVC PANEL
Indicates a problem with the panel. The panel is not operating. Call
your servicing company for service.
SERVC PARAM
Indicates a problem with the panel. Your panel may not be
operating properly. Call your servicing company for service.
SERVC AC FAIL
Indicates that AC power to the system is interrupted. Check the
plug-in transformer and circuit breaker. Pressing [TROUBLE
SILENCE] silences the trouble buzz. The display clears when AC
power returns.
SERVC BATT LOW
Indicates the system's battery is low, or temporarily draining faster
than the system can charge it. If this display remains or appears
frequently, call your security company for service.
SERVC BATT MSING
Indicates the system's battery is disconnected or shorted.
SERVC COMM FAIL
Your system makes repeated attempts to communicate with the
monitoring facility. In the event your system fails to communicate,
the command center buzzes and displays SERVC COMM FAIL.
Notify your servicing company of the communication trouble. This
message may not appear in some systems.
SERVC KEYPAD
Indicates that a command center, other than the one displaying the
message, is in a trouble condition. Notify your servicing company.
21