Remote Program - Bosch Fire System User Manual

REMOTE PROGRAM ?

Description
Your servicing company can remotely program your security
system using the telephone line your panel is connected to.
Your servicing company may ask you to follow the steps below to
begin a remote programming session. The time it takes to program
the panel is dependent on the number of changes made to the
program.
You'll notice that two sets of procedures are presented. Which one
you use depends upon whether your system has a pre-
programmed telephone number in its memory.
My system has a phone number.
My system does not have a phone number.
For systems without a phone number:
1. Ensure your security system is at idle text.
2. Call this phone number: ______________________.
This number is designated for the Remote Account
Manager. You must make the call using the telephone
located ___________________________.
3. Identify yourself and your premises (account number,
name, address, etc.) and advise the operator of the services
you wish to have performed.
4. Press the [ESC] key to enter the Menu, then press [NEXT]
repeatedly until you reach the REMOTE PROGRAM ?
prompt. Press [ENT].
5. The display shows RAM CONNECTING.
6. The security system now disconnects telephones sharing its
telephone line during the remote programming session.
Hang up the telephone now.
7. The display changes to SYSTEM PROGRAM.
17